Topaz 8 Plus - Dynamic Surface - Low Air Loss System by Quart HealthCare
Is ideal for individuals living in the community with Stage I – III pressure wounds or as a preventative measure. It requires minimal maintenance or adjustments. The maximum weight capacity is 350 lbs.
The design of the individual cells inside the mattress are similar to a figure 8, divided into two 4″ sections. The lower four inches remain inflated at all times. The top four inches alternate in a 3:1 pattern so that 66% of the body is constantly supported. This allows for a more stable surface.
To ensure the longevity of the control unit we recommend inspecting / cleaning the filter monthly.
Only 8” thick, a better fit for home care and hospital beds
Auto-pressure Detection, eliminating the guess-work when setting up the mattress
Figure 8 cell design provides fowler position support, prevents bottoming-out
Auto-Memory ensures the mattress returns to previous settings following a power failure. Lock-out feature prevents tampering with settings
Cover material is breathable, easy to wipe clean
Master Control Unit features:
Micro Low Air Loss Technology – Air escapes from laser-cut openings located under air cells and distributed away from the skin.
Deep Cell 3:1 Alternation Therapy – 18 independent 8 inch high cells inflate and deflate in a 3:1 cycle, creating NEW! – When CPL mode is selected, mattress maintains function at a reduced selected pressure (Constant Low Pressure) in static mode. Cells have a figure “8” design; the bottom half is always inflated and only the top half alternates. In the event of a power failure the bottom half of the cells remain inflated up to 72 hours
Comfort Level and Auto Detection – 8 soft/firm settings offer easy comfort adjustment allowing caregivers to fine-tune therapeutic support and optimize patient comfort. Auto Detection can be used to automatically detect weight of the individual and set appropriate pressure for patient comfort.
Auto Firm – Inflates the mattress with a simple push of a button for installation and nursing care requirements.
Auto Alarm – Visual and audio alarms in the event of power failure, low pressure and service indicator.
CPR quick-Release Valve – Deflates the torso section in less than 20 seconds in the event of medical emergencies.
Mattress Specifications
Weight Capacity
Up to 350 lbs
Inflated Dimension
36″ x 80″ x 8″
Weight
22 lbs
Air Cell Material
Polyurethane
Cover Material
2-way stretch ployester with PU coating
Base Material
Nylon Polyester fabric
Safety Standard
Meets open flame requirements
Control Unit Specifications
Inflation Time
Under 35 minutes
Functions
10/15/20/25/30 min Cycle Time 8 comfort levels; Auto firm; Static mode CPR Valve, Auto Detection
Power requirement
AC120V 60Hz or AC230 V 50Hz, .25 A Max
Size
12.5″(L) x 8.6″(W) x 4.7″(H)
Weight
7.7 lbs
Max. Air-flow
8 lpm
Safety Standard
UL/cUL
Warranty
2 year warranty from the date of purchase against manufacturing defects
