Free Shipping Over $200
Free Shipping Over $200
Suitable for clients with high to very high risk for pressure injuries
Bilateral turning can significantly reduce pressure on a client’s body while increasing capillary circulation. For immobile or unconscious clients, caregivers must turn them up to 10x/day to achieve this.
With the Pro-Care Turn surface, it saves caregivers’ time, resources, and health while maintaining quality care for their clients. The 30° degrees of turning not only complies with clinical guidelines, but also
provides optimal comfort.
There are three therapies available: CLRT, Alternating Pressure (APT), and Continuous Low Pressure modes, and they can be tailored to individual pressure care plans.
The Turning dwell time can be selected between 10, 20, 30, and 60 minutes.
APT mode that assists in wound healing and prevention is available in four operating cycles (10/15/20/25 min.) based on therapy requirements.
The high side bolsters reduce the risk of bed entrapment and accidental falling out of bed, and they support the client’s arms while in turning therapy.
The system also features seat inflation for the Fowler position, and single air-cell deflation for the vulnerable heel section allowing them to float with zero pressure.
To protect your clients, the Pro-Care Turn has a number of added safety features like a rotation pause function to allow caregivers to stop a turn right away, transport mode that maintains static pressure relief for six hours during transport or a power failure, plus an accessible and highly visible CPR release valve.
Model | Pro-care Turn (5’’ Replacement) | |
---|---|---|
Pump | Dimensions | 34.1 x 16.5 x 26.0 cm |
Weight | 4.5 kg / 9.9 lbs | |
Case Material | Flame Retardent ABS | |
Supply Voltage | AC 230V, 50Hz | |
Operating Cycle Time | 10, 15, 20, 25 min. | |
Dwell Time | 10, 20, 30, 60 min. | |
Mattress | Dimensions |
78.7” x 36” x 5”, side bolsters 10”/ 200 x 85/90 x 13 cm, side bolsters 25 cm |
Cell Height | 13 cm cells with two turning cells underneath from 4th to 12th air cells | |
Weight | 11.4 Kg / 25 lbs | |
Cover Material | 4-way stretch PU / Polyester cover with welded seams | |
Cell Material | TPU | |
Maximum Patient Weight | 180 kg / 397 lbs | |
Flame Retardant Standards | EN 597-1 & EN 597-2 | |
CPR Knob | 1 Piece |
Manufacturer | Permobil |
---|